By the way do I need the accessory bay I just remove it but I can put back if is important
Do you have ani good place to add the tarot motherboard I don't wanna leave it out side of the droneThats good that it works.
No when you connect to mission planner you will power up the solo and controller make sure you are connected to the solo wifi on your PC fire up mission planner and in the upper right corner select UDP and connect to the solo. do not connect any wires to the gimbal at all
The accessory bay connection plugWhat do you mean you removed the accessory bay?
Not following you is this separate from the Gimbal? If so Maybe it will fit up where the gimbal cables reside? Make sure you Isolate it you do not want to short anything inside the solo.Do you have ani good place to add the tarot motherboard I don't wanna leave it out side of the drone
You are not using the Plug at all.. but you will need to use the HDMI cable for a goPro or which ever camera you are using for FPV.The accessory bay connection plug
You are not using the Plug at all.. but you will need to use the HDMI cable
I didn't cut it i remove It in a way I can put it back but I don't really need it it or i do?Why is that cut out of the solo? You were suppose to solder from the top of the board? Its not a big deal but now you cannot connect anything to the accessory bay..This Picture is the top of the main board right under the battery tray you solder the wires from the topView attachment 7134
No not for what you are trying to accomplish, but if and when you need it just reinstall it if you are that good with soldering those small wires, I know my old self couldn't too shaky LolI didn't cut it i remove It in a way I can put it back but I don't really need it it or i do?
Lol okay do you have a good place to add te the tarot motherboard?No not for what you are trying to accomplish, but if and when you need it just reinstall it if you are that good with soldering those small wires, I know my old self couldn't too shaky Lol
Is it separate from the Gimbal? will it fit in the Gimbal bay? If so Isolate it from any shorting of the components inside the Solo which Im sure you are aware ofLol okay do you have a good place to add te the tarot motherboard?
hey can you email me tigrer2127@gma.comJust so you know I had to figure this out myself without any guidance because nobody put any info out there except for 3dr Solo hacks...
We use essential cookies to make this site work, and optional cookies to enhance your experience.