I had purchased a replacement Solo Body to mock up material on. Really hadn't touched it since purchased. I mounted my gimbal to it this evening and to my surprise was a piece of Sorbothane sticking on the inside hull. My Solo does not have this, which was circa Sept. 2015 from BB. The body was purchased around Nov. and came straight from China...
Anyway it appears to be 1/8" thick material that is about 1.25" x 1" rectangle. From my experience it appears to be 30 durometer, fairly soft for viscoelastic materials. The other thing interesting is that they heated the back side to make it adhere to the wall as pictured below. Sorbothane actually becomes fairly sticky when heated beyond 200F, this application appeared to be surface heating only.
Not sure this is actually a remedy for any HDMI cable induced vibes at this point, just passing on a find without any results. I'd imagine moon gel or other damping material could be substituted, so to each their own if your going to apply. Finally for this application I'd actually consider thinner sorbo, an 1/8" is a lot of cable flex room to lose, 1/16" material is available...
I'd presume you "down-unders" already have this installed based on your release date.
Anyway it appears to be 1/8" thick material that is about 1.25" x 1" rectangle. From my experience it appears to be 30 durometer, fairly soft for viscoelastic materials. The other thing interesting is that they heated the back side to make it adhere to the wall as pictured below. Sorbothane actually becomes fairly sticky when heated beyond 200F, this application appeared to be surface heating only.
Not sure this is actually a remedy for any HDMI cable induced vibes at this point, just passing on a find without any results. I'd imagine moon gel or other damping material could be substituted, so to each their own if your going to apply. Finally for this application I'd actually consider thinner sorbo, an 1/8" is a lot of cable flex room to lose, 1/16" material is available...
I'd presume you "down-unders" already have this installed based on your release date.
