Full Battery, Solo says 0%

Joined
Aug 6, 2015
Messages
18
Reaction score
3
Age
23
Location
Portland, OR
I finally got my Solos Compass calibrated and it says my battery is too low for flight. I tried both of my batteries that are at 100% and it still says on the app that the battery is at 0%. What should I check? Thanks a lot
 
Joined
Jun 4, 2015
Messages
2,911
Reaction score
1,699
Age
63
Using Tower or Mission Planner, double check that the Batt_Capacity parameter is set to 5200. I have seen where this had somehow got changed and gave a 0 or 1% reading.
 
Joined
Jan 1, 2017
Messages
98
Reaction score
35
Location
NE Ohio
Using Tower or Mission Planner, double check that the Batt_Capacity parameter is set to 5200. I have seen where this had somehow got changed and gave a 0 or 1% reading.
what if that setting IS set to 5200? I'm having the same issue and im not able to fly using either the Solo APP or Solex. Even in "Manual Fly" mode. But with tower i can arm the motors, take off and fly around but with no battery data displaying reading at 0% and the icon on the controller is in red. Thoughts?

**UPDATE**
Im able to arm the solo using the Solo and Solex APP by holding down the left joystick down and right for a couple seconds. Then pushing that joystick up takes it off. Can fly in both Manual and normal fly modes. The controller and both apps still report 0% and after landing, the controller still will not let me arm the solo for another flight.

changing batteries doesnt help at all as ive tried 4 batteries (all charged to full last night in prep of todays flight) and all have the same symptom.
 
Last edited:

New Threads

Members online

Forum statistics

Threads
12,500
Messages
144,274
Members
14,580
Latest member
MI Ranger