I've had a bug when using cable cam mode since the new update twice now. Thought I'd see if anyone else has had this error. Using a Samsung galaxy S6 with solo and gimbal.
I am getting an issue where the app seems to be stuck in cable cam mode layout. I can fly the solo regularly after this issue and the remote displays the correct fly mode however the app will stay in the cable cam layout. And each time I change modes on the remote with either fly button or my button B preset "fly: manual" it will change however in the app the screen displays "cable cam"
I can select some of the menu options in regard to cable cam however once I change modes all buttons on my phone screen become unresponsive. The only solution I have found is to land and reboot the solo.
The first time it happened I was loading a previous cable. The app asked me to fly to the blue circle, as I've done before. I flew to the blue circle and pressed load cable. The solo started to flash red lights and beep while gaining altitude, much like the return home feature. Then it suddenly stopped and the lights went back to normal. The solo was just hovering there so I tried to fly back down to the proper height for the cable cam. I tried to press load cable again and thats when I realized that the app was not responding. No buttons on my phone who do anything, the solo seemed to be stuck in cable cam mode. I pressed fly to get out of cable cam mode and as mentioned the screen stayed on cable cam but the remote displayed "fly mode".
The second time this happened to me was yesterday mid cable. I had set a cable and was flying it in reverse when solo suddenly stopped and began flashing red, beeping and gaining elevation again. Again, it only did this for a moment then stopped. And again same symptoms until a reboot.
Has anyone else had this happen? I will be sending an email to 3DR with regards to the issue as well.
I am getting an issue where the app seems to be stuck in cable cam mode layout. I can fly the solo regularly after this issue and the remote displays the correct fly mode however the app will stay in the cable cam layout. And each time I change modes on the remote with either fly button or my button B preset "fly: manual" it will change however in the app the screen displays "cable cam"
I can select some of the menu options in regard to cable cam however once I change modes all buttons on my phone screen become unresponsive. The only solution I have found is to land and reboot the solo.
The first time it happened I was loading a previous cable. The app asked me to fly to the blue circle, as I've done before. I flew to the blue circle and pressed load cable. The solo started to flash red lights and beep while gaining altitude, much like the return home feature. Then it suddenly stopped and the lights went back to normal. The solo was just hovering there so I tried to fly back down to the proper height for the cable cam. I tried to press load cable again and thats when I realized that the app was not responding. No buttons on my phone who do anything, the solo seemed to be stuck in cable cam mode. I pressed fly to get out of cable cam mode and as mentioned the screen stayed on cable cam but the remote displayed "fly mode".
The second time this happened to me was yesterday mid cable. I had set a cable and was flying it in reverse when solo suddenly stopped and began flashing red, beeping and gaining elevation again. Again, it only did this for a moment then stopped. And again same symptoms until a reboot.
Has anyone else had this happen? I will be sending an email to 3DR with regards to the issue as well.
