Solo battery suddenly showing 1% battery life on a freshly charged battery.

[USMC86]

not a different battery; a different drone-

 

[tpsharkey]

I have two batteries but both display 0%, all started when a motor get damaged but I changed it for a new one but still 0% shows in the app and can’t fly or test the new motor

I brought a used Solo that read 0 voltage. I removed one motor pod at a time, until the voltage read normal and Solo then would arm.

 

[Razaqui]

I have removed all of them and still display 0% of battery.

 

[RichWest]

I have removed all of them and still display 0% of battery.

Check your black/white wires going from the power circuit board down to the main board.

See the image in the following link...SCL SDA connected wires....

https://3drpilots.com/threads/fully-charged-battery-reads-0-volts-on-app.1815/#post-25014

 

[jimloss]

Try a parameter reset: Parameter Reset — Copter documentation

If that doesn't work, check both end connections of the small gauge wires on the back side of the battery connector on your Solo.

 

[Pedals2Paddles]

If it is reporting 0%, the battery is probably malfunctioning. If this was a connection or wiring problem, it would be blank or read -1%. If it is showing something other than blank or -1%, that that is what the smart battery is reporting. The problem is the battery, not the solo.