Since the announcement of Open Solo 3.0.0 what is the real advantage of upgrading to the Green Cube?
2.0 and 2.1 have these features in common (everything but the MPUs):
FMU Main Board
Vibration Damped IMU board
The MPUs are still InvenSense - but
2.0 has MPU6000
2.1 has MPU 9250 or ICM 20xxx integrated accelerometer / gyro.
Is there a significant advantage to upgrading to the Green Cube?
Are there features in the 2.1 that I'm missing?
Thank you.
2.0 and 2.1 have these features in common (everything but the MPUs):
FMU Main Board
- STM32F427; flash 2MiB, RAM 256KiB.
- On-board 16KiB SPI FRAM
- MS5611 Baro
- All sensors connected via SPI.
- Micro SD interfaces via SDIO.
Vibration Damped IMU board
- LSM303D integrated accelerometer / magnetometer.
- L3GD20 gyro.
- MS5611 Baro
- All sensors connected via SPI.
The MPUs are still InvenSense - but
2.0 has MPU6000
2.1 has MPU 9250 or ICM 20xxx integrated accelerometer / gyro.
Is there a significant advantage to upgrading to the Green Cube?
Are there features in the 2.1 that I'm missing?
Thank you.