I used to have a crash. When I turned on the solo after the crash, the 2 ESCs no longer worked .. and they quickly got hot!
I replaced all the ESCs with Turnigy Multistar 32bit 20A Race Spec ESC 2 ~ 6S , one motor spinning pulses when the solo is disarmed. Other motors are normal. I calibrated the esc in the mission planner. All four motors start smoothly in the 5% motor test mode. I swapped the engines with esc, and noticed that this problem is only on the rear left. What are your thoughts ..?
installed open solo 4
I replaced all the ESCs with Turnigy Multistar 32bit 20A Race Spec ESC 2 ~ 6S , one motor spinning pulses when the solo is disarmed. Other motors are normal. I calibrated the esc in the mission planner. All four motors start smoothly in the 5% motor test mode. I swapped the engines with esc, and noticed that this problem is only on the rear left. What are your thoughts ..?
installed open solo 4
Last edited: