My first orthomosaic surveys

[ChrisBird]

With Geosetter you manually link an image with a point in the log, then all the other images are associated with log points. With Mission Planner you're relying on the timestamp on the log and the image to be in sync.

After you tag the photos in Geosetter you should then go back through the log and make sure that the log and images match up.

It's all in the video that Frank posted. I think the first 7 minutes talk about Mission Planner, then the rest talks about Geosetter.

Hi, you know you can do a time offset, so if you know the time difference between them its not an issue.

Chris

Sent from my SM-G930F using Tapatalk

 

[ChrisBird]

When I used MP to geotag, it worked perfectly. I dont' recall it using time stamps. I think it just did it in numerical order. You need to feed it only the images from the survey, it does them in order. If there is mismatch in image count, it will tell you and not work. So the time stamps of the images were irrelevant.

Yes now you mention that i think your right. The time offset is for the other method it uses.

In the cam msg mode (so working off msg count) it has a actual pic delay you can add as most dont trigger immediately.

I too havent had any issues besides it wiping the camera model on earlier versions.

Edit: as normal it had been mentioned, should learn to read the whole way to the end of a thread before replying....

Chris

Sent from my SM-G930F using Tapatalk