- Joined
- Aug 18, 2015
- Messages
- 79
- Reaction score
- 20
- Age
- 52
Today I went out to fly my Solo after setting up a simple flight in Tower. The flight plan was to track around the perimeter of a small lake near my apartment at 100ft AGL and film a couple regions of interest... essentially to test a new flat lens I had installed on the GoPro Hero Black. I tookoff manually to make sure everything was stable and once the drone was hovering nicely I started the mission. The solo gained altitude and started to get close to 100ft but the right side suddenly dropped and almost flipped Solo. Solo almost immediately compensated but started losing altitude toward the pond in a swinging motion as it sort of dropped like feather listing back and forth. I hit the manual override and could not get Solo to come out of the swinging motion and rapid loss of altitude. At this point unfortunately all I have is the controller... yea, lost the entire drone/gimbal/camera/new lens/sd card. What I am trying to determine is if there is a way to read any logs or flight data just from the controller to determine what may have failed. I also emailed 3dr to see what they can do on their end.
Thanks,
-Mike
Thanks,
-Mike