This problem started intermittently where one out of every 10 flights (open solo ) is have no video feed and a restart / sequence would usually solve it.
There was no solo crash, no hard landing, and no updates done to the GoPro hero 3+camera.
I plugge the camera in to two different other devices - a tv - and an fpv headset - using the solos HDMI CABLE and camera and cable are Working fine! No problems.
Connecting same camera and cable directly to the SoloLink (bypassing the gimbal) No live feed. I tried two different SoloLinks -(Replaced it on the mainboard) And of course made.sure the ports are secure on each and no bad solder joints. Still no feed.
When gimbal is attached I can control the camera from the controller and it records video to.the SD in camera but no live feed.
I tried another good working hdmi cable in a second Solo running arducopter which makes it the THIRD Solo Link Hdmi port tried. Still nothing.
I've tried every possible startup sequence including the same one I've used for.years and still no video feed. I'm stumped. Why to.do next?
There was no solo crash, no hard landing, and no updates done to the GoPro hero 3+camera.
I plugge the camera in to two different other devices - a tv - and an fpv headset - using the solos HDMI CABLE and camera and cable are Working fine! No problems.
Connecting same camera and cable directly to the SoloLink (bypassing the gimbal) No live feed. I tried two different SoloLinks -(Replaced it on the mainboard) And of course made.sure the ports are secure on each and no bad solder joints. Still no feed.
When gimbal is attached I can control the camera from the controller and it records video to.the SD in camera but no live feed.
I tried another good working hdmi cable in a second Solo running arducopter which makes it the THIRD Solo Link Hdmi port tried. Still nothing.
I've tried every possible startup sequence including the same one I've used for.years and still no video feed. I'm stumped. Why to.do next?