- Joined
- May 26, 2015
- Messages
- 408
- Reaction score
- 276
- Age
- 79
ReadyToFlyQuads. Problem is there are two different cable connections . When SteveMeyer75 was doing the cables I ordered 2 cables. One for the Neo7 to the board and another for the M8N to the board. Unfortunately the pins for the M8N were opposite so it didn't work. Sent it back to Steve but haven't heard from him for months. I'm not even sure if he ever cashed my check. So, I had to mod the 2 cables together, slipped on heat shrink tubing (local hobby store) and soldered the 4 wires together. Left enough overage just in case I screwed up. Don't forget the ferrite ring. The 2 wires not used are from the compass on the M8n. Just take your time, be sure the solder joints aren't cold soldered. You should be fine.