I got my replacement gimbal from 3dr Services yesterday. They received my return last Friday and had a replacement out to me within a week! Props to 3dr for being on point. Anyway after the installation I tried out the new to me gimbal and it's working great, but unfortunately I was only getting a white screen with a few lines of color. After reading thru some of the threads on here I found the info you had been posting. I really hope this is the problem, but it sounds like it is quite common unfortunately!Works for most Video Feed irregularities.
Little more info.Here's my latest video issue. New everything.View attachment 5868
Little more info.
Did all updates complete? GP, Solo.
And? Anyone else have any ideas? Could upgrading the wifi cards cause this?
Same thing here. but reinstalled Relish3d for Vibration issues.Thanks for the help, I had installed the Relish3d cable and thought I screwed things up. Put the oem cable back in with suggested foam mod and all is good again!
If anyone is still following this thread - this was very successful - no green screen and the video transmission is solid.If your video feed is Rolling, freezing, Stopping. I have a fix that worked for many Solo users.
I always assumed that the problems mentioned above, where do the HDMI connection at the Gimbal side of the HDMI cable. It was the first place i would checked for a bad connection. I have had to Change HDMI cables 3 times in 1 year. Relish 3D sending me out a new HDMI ribbon cable, but with this fix, never got to use it.
I checked the other end of the HDMI, the one that goes to the main board.
Needed to go through a process to open Solo up "not hard". then i tugged on HDMI plug & it seemed loose.
Squeezed "Pinched" the HDMI receptacle "socket" very lightly, then re inserted the cable, seemed a bit more solid.
Behind the plug, the cable was wobbly in a up, down direction.
A full 1/2 in. of play.
Cut out a piece of hard foam almost a 3/8 thick, wedged it between the top of the HDMI plug "about 1" behind the HDMI receptacle & the main board.
Felt snug enough.
Put back everything, turn on Solo & like magic, all my problems with Video feed gone. never came back!
This will fix many Video Feed problems.
Again, very lightly compress the HDMI connectors.
at 6:45 of this video shows where HDMI cable is >>How to install ribbon cable Video
View attachment 3832
We use essential cookies to make this site work, and optional cookies to enhance your experience.