Gimbal Misbehaving when fed telemetry data

VCD

Joined
Nov 7, 2016
Messages
165
Reaction score
47
Age
44
I attached 3DR Gimbal + IMX6 only a bigger copter with CubebBack , running AC4.0.5
The gimbal link is on Telem2 using MAVLink1 at 230k
:Screenshot from 2021-01-07 15-19-55.png
It configured rates itself
Screenshot from 2021-01-07 15-15-13.png

If I disconnect the serial to the gimbal connection, then the gimbal is nice and still ... when connected, it will do "random" movements

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Also verified:
This gimbal behaves well in a Solo, Another 3DR gimbal acts the same way. (so it is NOT the gimbal)
Tested with AC4.0.3 and AC4.0.5 - I have attached parameters.

MNT_TYPE is 2 (Solo Gimbal) - if set to 0 , then the Gimbal will not misbehave (nor be fully usable)

@Pedals2Paddles - you have extensive experience with Solo, could you please share your thoughts on this?
 

Attachments

  • FoxA.zip
    5.6 KB · Views: 2
Last edited:

Members online

No members online now.

Forum statistics

Threads
13,093
Messages
147,741
Members
16,048
Latest member
ihatethatihavetomakeanacc