Controller Display stuck on Gimbal View

Bat

Joined
Mar 22, 2020
Messages
7
Reaction score
1
Age
73
The controller display has defaulted to the Gimbal view with no Gimbal installed.
How do I change back to the normal display that shows the current flight information speed, altitude and other flight info
It is probable simple but I have not been able to find it

Thank you
 
Being stuck on that screen typically indicates that one of the gimbal control buttons is stuck OR that the OS on the internal i.MX6 is corrupted.

Check that your gimbal tilt switch isn't jammed slightly up or slightly down. Also check the 1 and 2 shoulder buttons
 
Being stuck on that screen typically indicates that one of the gimbal control buttons is stuck OR that the OS on the internal i.MX6 is corrupted.

Check that your gimbal tilt switch isn't jammed slightly up or slightly down. Also check the 1 and 2 shoulder buttons
**
Thank you for answering
The tilt and pan switches are not stuck and move as they should. What is the fix if the MX6 is corrupted.
I have done a factory reset and it flies normally except for the controller view.
 
And the preset buttons? On the shoulder of the controller.

You'd have to re-write a new MicroSD card for the controller's i.MX6
 

Members online

Forum statistics

Threads
13,093
Messages
147,741
Members
16,047
Latest member
pvt solo