Here you go: Cable Cam | 3DR | Drone & UAV TechnologySo if I set point A to be facing North, move the solo, turn the camera pointing South and set that as point B, solo will do everything for me? What if I want to change the angle of the camera mid flight? Is that when I do the left control while it is running the program?
Do you mean button 1 and 2?Yes solo will do the ease in and out all on its own
Want to see it work, use the gimbal controls on the right side of your controller
with the paddle on the left point your camera staight down. press and hold the b button on the gimbal controls on the right, it is the button below the roller wheel for speed
Now point your camera up to the 90 degree mark. press and hold the A button above the roller control. it will set 90 degrees as your a position. Now scroll the roller wheel and set if for like 18 seconds.
Now press the b button. watch the gimbal slowly start moving down then speed up towards the 45 degree mark, as it approaches the 0 or all the way down position it will slow. Effectively easing into the pan and easing out of the pan, all on its own.
Does the same thing in cable cam.
As other have said, Point A could be north with camera pointed straight down, point B could be 300 yards away, facing south with camera pointed straight ahead. Solo will do all the camera tilting, panning and flying for you.So if I set point A to be facing North, move the solo, turn the camera pointing South and set that as point B, solo will do everything for me? What if I want to change the angle of the camera mid flight? Is that when I do the left control while it is running the program?
Yes, this is button 1 and 2. A and B are setting your start/stop points on the top of the controller.the buttons on top and bottom of the roller
top right side of the controller
We use essential cookies to make this site work, and optional cookies to enhance your experience.