Hi guys,
I'm facing really odd problem with one of my Solos and I hope that you can guide me in a right direction to solve it.
It's almost brand new, flew only one time without any crashes. Then all of a sudden - it could not boot anymore. Right after the start it was beeping - two short, two long and all green solid lights on motor ESCs(reboot is not helping).
And the worst thing - it's failing to flash any firmware(in the end of procedure of flashing - two long beeps). For example - I can do factory reset, but then I'm to able to flash anything newer(and I'm still not sure that factory reset is finising in a right way).
Tried with putting firmware to /firmware folder via WinSCP and with loading custom firmware via Mission Planner. File itself dissapears from /firmware and appearing in /firmware/loaded , but it's not updating firmware itself.
My latest success - I was able to update firmware with Solo APP(before that - it was always in "Looking for Solo" state) and looks like it's still corrupted(solid green lights, three short and two long beeps at start) - controller saying "waiting for Solo", but it gives SSH connection(so they are paired).
I still can't upload any firmware(in attached 3dr-solo.log you will see my attept to upload pre-release 1.5.3).
And "3dr_solo local1.err pix: not detected at any baud" line from 3dr-solo.log gives me a feeling that my problem could be really serious.
I hope that I provide every critical informating for you to determine possible problem.
And I cannot get it to service - I'm in Ukraine, so it could really be difficult)
I'm facing really odd problem with one of my Solos and I hope that you can guide me in a right direction to solve it.
It's almost brand new, flew only one time without any crashes. Then all of a sudden - it could not boot anymore. Right after the start it was beeping - two short, two long and all green solid lights on motor ESCs(reboot is not helping).
And the worst thing - it's failing to flash any firmware(in the end of procedure of flashing - two long beeps). For example - I can do factory reset, but then I'm to able to flash anything newer(and I'm still not sure that factory reset is finising in a right way).
Tried with putting firmware to /firmware folder via WinSCP and with loading custom firmware via Mission Planner. File itself dissapears from /firmware and appearing in /firmware/loaded , but it's not updating firmware itself.
My latest success - I was able to update firmware with Solo APP(before that - it was always in "Looking for Solo" state) and looks like it's still corrupted(solid green lights, three short and two long beeps at start) - controller saying "waiting for Solo", but it gives SSH connection(so they are paired).
I still can't upload any firmware(in attached 3dr-solo.log you will see my attept to upload pre-release 1.5.3).
And "3dr_solo local1.err pix: not detected at any baud" line from 3dr-solo.log gives me a feeling that my problem could be really serious.
I hope that I provide every critical informating for you to determine possible problem.
And I cannot get it to service - I'm in Ukraine, so it could really be difficult)