tower

Hello all, When using the Tower app on a tablet, there is an option for a variety of gopro cameras, such as the hero 3+ silver. I know the gimbal only allows full camera control with a 4 black, but I'm not sure about other apps. Does anyone know if the Tower app can trigger this specific...

I have the Solex app and Tower app. I am exploring the pro's and con's of both. In addition , trying to figure out the best settings for the GoPro and Solo speed to capture quality images to be stitched. So on that note below are the questions: 1. What are the pro's and con's of Solex and Tower...

I think we need @P2P for this one... I was flying a very reliable Solo the other day using Tower on a mission, battery is relatively new to service with only 10-15 flights. Shortly after reaching 50m and heading to the next waypoint at 10m/s, Tower said "battery at -1%". And something just...

Anybody have a suggestion for using Solo and Tower (or MP) to create point cloud of a series of utility poles? Something like Tower's Structure scan would work, except the the 'structure' is long and narrow, something like 30' x 200', so an orbit needs to be elliptical rather than round. Is...

So i changed the parameter in Tower so that Solo can spin before returning home.......i uploaded it to my drone & Solo still reverses home........anyone knows why it wont work? Links for WP_YAW_BEHAVIOR parameter: VALUE MEANING 0 Never change yaw 1 Face next waypoint 2 Face next waypoint except...

I uploaded a mission to Solo, it included a Change Speed waypoint of 12m/s at the very beginning. Hit Auto, flew this mission, no problems, flew at 12m/s. Landed, did not power off, did not load new mission. Hit Auto, flew same mission again (still in Solo's memory). This time, it went to...

The other day I loaded and flew a Tower mission. At the end I took control and brought it in to hover. Just for giggles I then loaded another mission into Tower and uploaded it to Solo. After telling Solo to fly on "Auto" it went up a few feet, then stopped and hovered. I don't have any reason...

I recently started making youtube videos covering a huge range of things, if some of you would like to check it out they can be found here 3DR Solo Instructional Videos - YouTube

ISSUE: Received the backpack bundle 3dr solo and when capturing satellites it would give a level error and go back to looking for satellites and give level error again (satellites inside 0 outside 9).Ordered the MRO GPS u-blox Neo M8n/ 3dr solo upgrade($80) and it would capture 15 satellites...

anyone else experience altitude loss when flying a large orbit? Orbits are in the range of 50m or 100m radius. I have flown a few Tower orbits and have seen the Solo lose altitude in a few of them. Note that Tower does properly show the altitude as it is descending, so it is not the case that...

Hello all. I bought a new Solo yesterday. Did updates and went into the solo app to calibrate sensors and it fails. I went ahead and did a little test flight and it seems to be behaving other than the female voice saying GPS lost constantly which makes me nervous. Anyway I launched tower and it...

I have ran a number of autonomous missions with Tower and had the FS_THR_ENABLE parameter set to (2)-enable continue in auto. What is the effect of this parameter in regular Smart Shots (Guided)? My Smart Shots have always been close proximity that loss of controller signal should not be an...

Hello! Recently I installed Tower ver. 4.0 on both of my Android devices (Android ver. 4.1.2 and 4.0.4). Till then I used 3DR Solo App on my IPhone 6, IOS 10.0.2, which is still working fine. Unfortunately I could not get a live video feed on Tower on both Android devices. I have checked the...

Now we know that the stock Solo app is actually pretty darn good. It has everything you need and it is easy to use. But I thought I would delve a little deeper and use the way points offered in Tower. I noticed that the control is very nice, however you lose the function the solo app provides...

I am trying to find the best settings for doing aerial mapping. I understood there are better cameras or even the option to replacel GoPro lens with 5.4mm Peau but I am trying to work with what I have...if possible. So far, I've been testing with DroneDeploy, even though they say seem to...

This is what I'm doing: 1. Create Point of Interest mission in Tower. 2. Set FS_THR_ENABLE = 2 (Enabled Continue with Mission in Auto Mode) 3. Take off in auto. If I loose contact between Solo and the controller Solo will keep flying the flight path but will not point at my POI. Anyone else...

Hi, I can't change the map provider in Tower. It only gives me google map option. See attached picture: . The same happens in the two devices I use: 1.- Cellphone Samsung Galaxy J5, Android 5.1.1, Tower v3.2.1 2.- Tablet Samsung Galaxy Tab 4, Android 5.0.2, Tower v3.2.1 I want to use Mapbox...

Hola a todos he usado mi única torre y Gopro héroe 4 Negro, todo ha ido bien, sin embargo la información contenida en los cuadros de coordenadas están equivocados. Yo vivo en Costa Rica es Latitud: 9.999999, y la longitud es: -84.999999999 sin embargo tienen una Latitud: 9999999999 y longitug...

Solo at 2.4.1-6 (latest) GoPro Hero4 Black 3.0 iOS App 2.4.0 (latest) Tower 3.2.1 (latest) Tower Beta 4.0.0 Beta 4 (latest) First flights today. Worked great on iOS 10 with Solo App. All recordings worked fine. But on Tower (and Tower Beta) the GoPro would FREEZE after anywhere 30 seconds...

ETA: * OCT 10, 2016 - Tower Final Release v 4.0.0 now on Google Play. I had been playing with the old Tower beta v 3.2.1-beta.8 because the regular release version would crash now and again on my S5 Galaxy, but not the old beta. Tower 4.0.0 -beta.2 was pushed this morning, just a few hours...