So after a rather unspectacular crash in my backyard, I can't seem to get this poor guy to start up again. When I press the power on the Solo, it begins the normal set up/lights for a moment and then switches to just one flashing white light that flashes in relatively quick bursts of two. It was also making a clicking sound at the same time, but after removing the gimbal that sound stopped.
I couldn't find any info about this particular error code. It does the same thing when I connect the battery to the charger.
There was no visible damage to the Solo except of course propellers and the battery bay looked like it had given a little, but i took it out and it popped back into place like normal.
The cause of the crash was basically me majorly underestimating how fast "very fast" was and then attempting to take off from a semi-challenging area (which is usually no sweat on medium).
The thing didnt want to shut off, either. It was grounded amd spinning all four props furiously fir a good 15 seconds or so before shutting off. The controller had gone black and they were still spinning.
I'm going to open a ticket right now but I figured it couldn't hurt to see if anyone here has some insight.
It doesn't respond when I attempt to factory reset and the controller doesn't seem able to communicate with it.
Thanks in advance.
I couldn't find any info about this particular error code. It does the same thing when I connect the battery to the charger.
There was no visible damage to the Solo except of course propellers and the battery bay looked like it had given a little, but i took it out and it popped back into place like normal.
The cause of the crash was basically me majorly underestimating how fast "very fast" was and then attempting to take off from a semi-challenging area (which is usually no sweat on medium).
The thing didnt want to shut off, either. It was grounded amd spinning all four props furiously fir a good 15 seconds or so before shutting off. The controller had gone black and they were still spinning.
I'm going to open a ticket right now but I figured it couldn't hurt to see if anyone here has some insight.
It doesn't respond when I attempt to factory reset and the controller doesn't seem able to communicate with it.
Thanks in advance.