I read through the sticky and searched but want to make sure I'm correct. Only used hero4 black twice set to 2.7k 30fps and had some stuttering. Had solo speed/rotate on the second slider setting. So not very fast.
Stuttering occurred when rotating the gimbal and when turning. I thought with these setting I would be ok but apparently not. Should I only use 30fps for very slow fluid movements to avoid stuttering or is something else wrong?
Stuttering = jerky or choppy movement. It stutters when viewing live though my iPgine and when using Quik software.
Computer specs are i3, 3.5ghz, 2 core, 4 processors, 6gb, nvidia GeForce gt 630.
Maybe 1080 at 60fps is better for anything other than the slowest speeds? I used the 2.7k settings from the sticky FYI. I was hoping to get good resolution with decent speed but maybe I'm hoping for too much.
Thanks!
Sent from my iPhone using Tapatalk
Stuttering occurred when rotating the gimbal and when turning. I thought with these setting I would be ok but apparently not. Should I only use 30fps for very slow fluid movements to avoid stuttering or is something else wrong?
Stuttering = jerky or choppy movement. It stutters when viewing live though my iPgine and when using Quik software.
Computer specs are i3, 3.5ghz, 2 core, 4 processors, 6gb, nvidia GeForce gt 630.
Maybe 1080 at 60fps is better for anything other than the slowest speeds? I used the 2.7k settings from the sticky FYI. I was hoping to get good resolution with decent speed but maybe I'm hoping for too much.
Thanks!
Sent from my iPhone using Tapatalk
Last edited: