Solo HERE M8N gps plug

[Albert]

I just installed the HERE M8N SOLO GPS KIT and I have the single plug, not sure where this plugs into SOLO. Thanks

 

[XevetS]

That cable plugs into an actual PixHawk carrier board "not the Solo Board". You need to purchase the correct cable for the Solo. Try Jesters Drones or if you are capable create your own by splicing into the original Solo gps cable..

 

[Albert]

That cable plugs into an actual PixHawk carrier board "not the Solo Board". You need to purchase the correct cable for the Solo. Try Jesters Drones or if you are capable create your own by splicing into the original Solo gps cable..

My error, forgot to mention I also installed the "Green Cube pixhawk"
Thanks

 

[Albert]

My error, forgot to mention I also installed the "Green Cube pixhawk"
Thanks

I asked "Jester" and he said this is the new cable
. I do have the other cable, will that plug in?
Thanks

 

[XevetS]

That cable plugs into a Pixhawk carrier board not the SOLO? The correct cable has two connectors one for the GPS and one for the internal compass that replaces the rear leg compass on the SOLO.. here is where I purchased mine.[email protected] Email him and tell him that you need a Here gps/compass cable for the solo it's 20 bucks shipped.

How to install

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Thanks to @SteveReno for the info

 

[Albert]

Thanks Steve, used other cable and installed, now I downloaded the Controller & Solo3.0.0.0 and now cannot get anything to connect. Followed "Open Solo - Install for stock solo and previously installed green cubes" youtube video " from "Matt Lawrence" posted. Not sure why there not connecting..
Thanks, AL

 

[XevetS]

Thanks Steve, used other cable and installed, now I downloaded the Controller & Solo3.0.0.0 and now cannot get anything to connect. Followed "Open Solo - Install for stock solo and previously installed green cubes" youtube video " from "Matt Lawrence" posted. Not sure why there not connecting..
Thanks, AL

Did you try the pair button under the solo?

 

[Albert]

Hey Steve, Your right... I finally got things to work, however I did miss doing the "Pair" and was able to still do the "level & compass" calibration. Not sure if that is good or bad. .Do you suggest to do the pair anyway?
Thanks, AL

 

[XevetS]

It looks like you are paired already if you were able to do the calibrations you should be good to go,

 

[Albert]

Thanks Steve for your help.
AL