So, about that accessory connector that used to be there....

[Redcon1]

Intending to hook up some extra LED lights, I removed Solo's motherboard last night. As usual required a black belt in jujitsu and lots of profanity, and when I got it out, I noticed that during the scuffle I'd broken the ribbon cable that connects the motherboard to the accessory port, so i wen ahead and snipped the other wires connecting to it also.
My question is this; When I put it all back together tonight, is it going to work properly since I never hooked anything up to it anyway?
Bonus question; What does the SSWT button do?

 

[Pedals2Paddles]

Yes it will work fine without it. The switch is the ArduCopter safety switch, which is disabled in the firmware.

 

[Redcon1]

Yes it will work fine without it. The switch is the ArduCopter safety switch, which is disabled in the firmware.

That's what I was thinking on the ribbon cable, just needed a little confirmation. The safety switch never occoured to be but should have. Thanks.

 

[Maddog]

Are you looking for something like this?

https://3drpilots.com/threads/brite-lite-anti-collision-lighting.11505/

 

[Redcon1]

Are you looking for something like this?

https://3drpilots.com/threads/brite-lite-anti-collision-lighting.11505/

Nope. I already had some lights laying around. Just decided to wire them up and wound up breaking the ribbon cable to the port that your lights plug into. Sorry.

 

[Redcon1]

Everything other than the port works fine, lights included.