So, about that accessory connector that used to be there....

Joined
Jul 28, 2017
Messages
115
Reaction score
29
Age
42
Location
15RYR542421
Intending to hook up some extra LED lights, I removed Solo's motherboard last night. As usual required a black belt in jujitsu and lots of profanity, and when I got it out, I noticed that during the scuffle I'd broken the ribbon cable that connects the motherboard to the accessory port, so i wen ahead and snipped the other wires connecting to it also.
My question is this; When I put it all back together tonight, is it going to work properly since I never hooked anything up to it anyway?
Bonus question; What does the SSWT button do?
Solo mamabord.jpg
 
Joined
Mar 12, 2016
Messages
3,920
Reaction score
2,620
Yes it will work fine without it. The switch is the ArduCopter safety switch, which is disabled in the firmware.
 
Joined
Jul 28, 2017
Messages
115
Reaction score
29
Age
42
Location
15RYR542421
Yes it will work fine without it. The switch is the ArduCopter safety switch, which is disabled in the firmware.
That's what I was thinking on the ribbon cable, just needed a little confirmation. The safety switch never occoured to be but should have. Thanks.
 

New Posts

Members online

Forum statistics

Threads
12,999
Messages
147,103
Members
15,762
Latest member
Socosan Adrian