Pano sphera:ERROR

Dmitry · Apr 30, 2017

This question is more to Kelly's addressed
When using the PANO-sphere, an error occurs at the end, after the last photo. When the solo is making the last foto, the GIMBAL turns off, but the video signal is on. I'm downloading the solo, I reboot and everything is restored. Photo attached as it looks
Disables at the end of the photoshoot gimbal

davemh · Apr 30, 2017

My response is not addressing your OP but that gimbal needs to be balanced! That camera should be level & looking forward when power is off. If not balanced the gimbals live is shortened plus not working properly and much harder than need be. Sorry, just my 2cw

Dmitry · Apr 30, 2017

My gimbal is balanced!
Error occurs when the solo is making the last 15 photo

Dmitry · Apr 30, 2017

Pano-sphera
AERO 360 from Verkhnyaya Armavirskaya ul., Sochi, Krasnodarskiy kray, Russia, 354207

jimloss · Apr 30, 2017

davemh said:
My response is not addressing your OP but that gimbal needs to be balanced! That camera should be level & looking forward when power is off. If not balanced the gimbals live is shortened plus not working properly and much harder than need be. Sorry, just my 2cw

You can't tell for sure if it's balanced or not by a picture.

A balanced gimbal stays in whatever position you put it in when the power is off. It should not self center or change position on its own. If it is unbalanced, it will move when you let go of it after changing it's position with power off.

Dmitry · Apr 30, 2017

When off, my cardan has the following position (Horizontal)

jimloss said:
You can't tell if it's balanced or not by a picture.

A balanced gimbal stays in whatever position you put it in when the power is off. If it is unbalanced, it will move when you let go of it after changing it's position with power off.

Dmitry · Apr 30, 2017

Stumbles on the PANO-sphere, other options work fine, but still selphi certainly does not work, I already said. And since the video is excellent as a separate photo

Dmitry · Apr 30, 2017

jimloss said:
You can't tell for sure if it's balanced or not by a picture. I do suspect that your are correct though

A balanced gimbal stays in whatever position you put it in when the power is off. If it is unbalanced, it will move when you let go of it after changing it's position with power off.

Have you tried the PANO-sphere option? Try, after the last photo, what does solo do, what's going on with you?

jimloss · Apr 30, 2017

Dmitry said:
Have you tried the PANO-sphere option? Try, after the last photo, what does solo do, what's going on with you?

I have never tried that shot. I just went outside and gave it a try. It seemed to work correctly - took shots at 90 degrees, then at an angle tilted down, then a final shot straight down. My gimbal stayed powered at the end and I was able to manually control it.

Dmitry · Apr 30, 2017

jimloss said:
I have never tried that shot. I just went outside and gave it a try. It seemed to work correctly - took shots at 90 degrees, then at an angle tilted down, then a final shot straight down. My gimbal stayed powered at the end and I was able to manually control it.

Android or App?