Gimbal Handheld Project

[zhrino]

I am aware that there is already a thread on this, however I would like to share my own progress with this​

project and receive the help and input of others. I have already assembled the PVC rig and made a mounting plate for the gimbal. I have the "gimbal data" cable but, the current issue with the project is powering the gimbal.

Someone has already done this using a Simple BGC Board. I was wondering if I could accomplish the same thing using a Storm32 BGC (I will include link below.) If that does not work I was also thinking about using the 3DR Solo Mainboard to control the gimbal, Current UAS sells replacements. The better of the two options for me would be the Storm32 simply because it is more budget friendly. Any feedback on this would be greatly appreciated!

Storm32 BGC 32Bit 3-Axis Brushless Gimbal Controller V1.31 DRV8313 Motor Driver $22.72 Free Shipping @GoodLuckBuy.com

Partlist
Gimbal
Imgur: The most awesome images on the Internet

Gimbal data cable
Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet

PVC rig
Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet

Lipo battery
Imgur: The most awesome images on the Internet

Lipo battery voltage tester w/ low voltage buzzer alarm
Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet

XT60 Connector
Imgur: The most awesome images on the Internet

Imgur: The most awesome images on the Internet
​