Tips For New 3DR Owners

LuvMyTJ

Admin
Joined
Nov 4, 2015
Messages
459
Reaction score
302
Location
Live! From New York!
One of the most important things you can do is to fully read and understand the manual for your new aircraft.

1. Inspect your aircraft and batteries


Before you head out to fly, make sure that the batteries in your remote controller and aircraft including any spares are all fully charged. You never want to have to land just when you've found a beautiful scene to film or photograph, and batteries sometimes are not completely accurate when showing their charged status. To avoid any such worries, charge your batteries until they are all fully charged, and then head out and fly.

Check that all propellers are securely mounted to the motors and that none of them are damaged or worn. Inspect the rest of the aircraft and replace or repair damaged parts before flight.


2. Calibrate your compass before taking off

Before you take off from a new site, you should always calibrate your compass. Each location has slightly different electromagnetic profiles and for best performance and most accurate positioning, you should calibrate for each specific location.


3. Fly in open, outdoor areas

Always choose a wide open area for every flight, well away from people and property. Head out to a large field or similar open space, with no or few trees and buildings. This way, you can more easily focus on learning to operate your aircraft and take your mind off having to precisely control the aircraft to avoid trees and other obstacles.


4. Do not fly over or near people and animals

Another thing to keep in mind when you choose where to fly is to make sure that it isn't crowded with either people or animals as a measure of safety. Though small and harmless, drones may still scare or irritate people and animals that are not used to seeing them. You want to make sure that our hobby has a positive impact on everyone you may encounter, so please be mindful of others when flying.


5. Fly no higher than 400 ft or below structures

In the U.S., the maximum allowed recommended height for flying hobby aircraft is 400 ft., so as to not interfere with full scale aircraft in the regular airspace. It is also advised that you do not fly under any type of structures as that may cause magnetic interference that disturbs the compass in your aircraft. It could also block or degrade the GPS signal and make you lose contact with your aircraft.


6. Maintain your line of sight

Even though your aircraft is capable of flying long distances, you should still be careful to maintain a line of sight to your aircraft at all times. If you fly behind obstacles such as buildings or mountains you can easily lose orientation or have difficulty returning home when your batteries start to deplete.


7. Be aware of orientation and maintain full control

To make it easier for yourself, take off with the aircraft oriented with the camera facing forward. This way, it will be much easier for you to know where the camera is pointed when you want to capture a video or photo.

Modern GPS enabled aircraft are incredibly easy to use thanks to the integrated software and hardware and the smart functionality they offer. However, you should still make sure to always have full control over your aircraft, even when using automatic functions such as auto-takeoff and auto-landing. Keep both hands on the control sticks to maintain control throughout each flight.
 
  • Like
Reactions: Lightfactory
For more info, go check out the FAQ in the Help section of this site.
 
One of the most important things you can do is to fully read and understand the manual for your new aircraft.

1. Inspect your aircraft and batteries


Before you head out to fly, make sure that the batteries in your remote controller and aircraft including any spares are all fully charged. You never want to have to land just when you've found a beautiful scene to film or photograph, and batteries sometimes are not completely accurate when showing their charged status. To avoid any such worries, charge your batteries until they are all fully charged, and then head out and fly.

Check that all propellers are securely mounted to the motors and that none of them are damaged or worn. Inspect the rest of the aircraft and replace or repair damaged parts before flight.


2. Calibrate your compass before taking off

Before you take off from a new site, you should always calibrate your compass. Each location has slightly different electromagnetic profiles and for best performance and most accurate positioning, you should calibrate for each specific location.


3. Fly in open, outdoor areas

Always choose a wide open area for every flight, well away from people and property. Head out to a large field or similar open space, with no or few trees and buildings. This way, you can more easily focus on learning to operate your aircraft and take your mind off having to precisely control the aircraft to avoid trees and other obstacles.


4. Do not fly over or near people and animals

Another thing to keep in mind when you choose where to fly is to make sure that it isn't crowded with either people or animals as a measure of safety. Though small and harmless, drones may still scare or irritate people and animals that are not used to seeing them. You want to make sure that our hobby has a positive impact on everyone you may encounter, so please be mindful of others when flying.


5. Fly no higher than 400 ft or below structures

In the U.S., the maximum allowed recommended height for flying hobby aircraft is 400 ft., so as to not interfere with full scale aircraft in the regular airspace. It is also advised that you do not fly under any type of structures as that may cause magnetic interference that disturbs the compass in your aircraft. It could also block or degrade the GPS signal and make you lose contact with your aircraft.


6. Maintain your line of sight

Even though your aircraft is capable of flying long distances, you should still be careful to maintain a line of sight to your aircraft at all times. If you fly behind obstacles such as buildings or mountains you can easily lose orientation or have difficulty returning home when your batteries start to deplete.


7. Be aware of orientation and maintain full control

To make it easier for yourself, take off with the aircraft oriented with the camera facing forward. This way, it will be much easier for you to know where the camera is pointed when you want to capture a video or photo.

Modern GPS enabled aircraft are incredibly easy to use thanks to the integrated software and hardware and the smart functionality they offer. However, you should still make sure to always have full control over your aircraft, even when using automatic functions such as auto-takeoff and auto-landing. Keep both hands on the control sticks to maintain control throughout each flight.
... You might as well just post a link to the FAA's website, ha ha. [emoji12] [emoji12] [emoji12]
 
2. Calibrate your compass before taking off

Before you take off from a new site, you should always calibrate your compass. Each location has slightly different electromagnetic profiles and for best performance and most accurate positioning, you should calibrate for each specific location.
Not necessary. Compass calibration is entirely independent of location.

It is only necessary if you've added something magnetic to Solo or if Solo's compass has been near a very powerful magnet.

On top of that, it is actually calibrating the compass while flying.
 
  • Like
Reactions: erikgraham
It's not a DJI product, you categorically DO NOT need to calibrate the compass as a matter of routine, the reason the Solo has more than one magnetometer is to do its own sanity check, it'll tell you if you need to calibrate. So I'd drop number 2.
 
Last edited:
  • Like
Reactions: erikgraham
Another moderator who is really a DJI guy. Lol. But @Ian [P13] , I think you meant to say drop number 2.

This should be a sticky, but there are a few things that are Solo specific that should be added. For example:

Start up procedures:
Best practice is to power on GoPro first, then Solo, then controller, then on phone/tablet connect to wifi, then launch Solo App. This order is NOT required, but if you are having problems, power down everything and use this order.
 
Last edited:
  • Like
Reactions: Ian [P13]
Yes I meant number 2, so edited my post. @erikgraham

I'm so glad I've not had to do the Naza dance since leaving DJI gear behind.
 

Members online

Forum statistics

Threads
13,100
Messages
147,774
Members
16,073
Latest member
andre felipe colorado