Hi All-
I'm in Switzerland and I don't have the correct cable to be able to read the flight logs / data from my solo.
When we turn it on, we get the alert sound (Sounds (Pixhawk/PX4) — Copter documentation) for "New IO Board firmware found" -- although I didn't make any changes to the firmware.
The solo will not connect to the controller, I just keep getting a "waiting for solo" message.
There is also a strange (quiet scratching/disk writing skipping) sound coming from internal componentry (gimbal is off).
We've opened up all the components and made sure connections are secure, cleaned everything with Q-Tips + tried a hard reset holding the reset button while powering on Solo.
Upon powering, we get no led light indication + all lights are green, indicating "Startup Unsuccessful, please restart solo"
Light internally (don't know which board) is solid red
Any tips?
TLDR;
All Lights Green
No LED when attempting hard reset
New IO Board Firmware sound when starting up although no changes made
Scratched disk skipping sound while powered on
No connection to remote
Pixhawk is lighting up solid red
I'm in Switzerland and I don't have the correct cable to be able to read the flight logs / data from my solo.
When we turn it on, we get the alert sound (Sounds (Pixhawk/PX4) — Copter documentation) for "New IO Board firmware found" -- although I didn't make any changes to the firmware.
The solo will not connect to the controller, I just keep getting a "waiting for solo" message.
There is also a strange (quiet scratching/disk writing skipping) sound coming from internal componentry (gimbal is off).
We've opened up all the components and made sure connections are secure, cleaned everything with Q-Tips + tried a hard reset holding the reset button while powering on Solo.
Upon powering, we get no led light indication + all lights are green, indicating "Startup Unsuccessful, please restart solo"
Light internally (don't know which board) is solid red
Any tips?
TLDR;
All Lights Green
No LED when attempting hard reset
New IO Board Firmware sound when starting up although no changes made
Scratched disk skipping sound while powered on
No connection to remote
Pixhawk is lighting up solid red