Is this what you need?Maybe you guys can help. I am trying to find out the pin setup for the ribbon cable for the accessory port. I've posted this request in many places but no help had come.
This is for the accessory connector. I'm looking for the pin out of the ribbon cable to the main board inside.Have you checked the Accessory Bay development guide? As I recall there is a pinout there.
You could easily use a Meter and that Pinout to determine the pinout on the other end.This is for the accessory connector. I'm looking for the pin out of the ribbon cable to the main board inside.
Thanks for your trying to help. It's much appreciated.
Points 1 and 2 are VBat. They still each get their own connection, as that is the way the battery voltage is kept stable. Connect 1-15 to their correspondent on the other end.
Hello
Thanks again for your help. There are only 13 points on the ribbon cable. These are connected to 1 to 13 on the accessory board. So if I go ahead and connect the ribbon cable to 1 to 13 on the main board this should be the answer?
Thanks again for all of you time and energy with this flummoxed noob. I also appear to not be able to use this forum, but I did upload two pics and they went somewhere. I hope you can find them .
Thanks for the input at 7:00 am. I will try to do the connections from 1-13. But then I have to ask what are 14 and15 on the main board soldered to?
I feel more inclined to use pins 3 -15 because it looks like 1 and 2 are soldered together
But then 1 and 2 ate power as has been suggested. So I am still confused.
If anybody currently has their SOLO apart could you please take a look and maybe send s pic, highlighting the ribbon cable's connection to the main board o really want to get this right, and not fry anything
Thank you all and thanks to the forum community l would be lost without this place.
We use essential cookies to make this site work, and optional cookies to enhance your experience.