Prior to this effort my drone had stock controller firmware and stock copter firmware. I took it for a flight last night, everything worked perfectly fine, no issues. Camera worked, flew for about 10-15 minutes.
I decided to install Open Solo 4 via Solex: Install via Solex App · OpenSolo/OpenSolo Wiki
I printed out the instructions, carefully read through once before I read through a second and third time. With the printed instructions I was checking the boxes as I went.
When I got to step 3.
Install Controller Package: From the firmware updates menu in Solex, tap the Open Solo 4-dev Clean Install (Controller)package that you previously downloaded.
I have no idea what to do now.
Please help.
I decided to install Open Solo 4 via Solex: Install via Solex App · OpenSolo/OpenSolo Wiki
I printed out the instructions, carefully read through once before I read through a second and third time. With the printed instructions I was checking the boxes as I went.
When I got to step 3.
Install Controller Package: From the firmware updates menu in Solex, tap the Open Solo 4-dev Clean Install (Controller)package that you previously downloaded.
- Press install. Press install again when prompted again to confirm. This is your last chance to change your mind.
- Be patient while numerous large files are extracted and scripts execute. Do not push buttons, exit the app, mess with the Solo, etc. Let it do its thing. Until it says it has completed.
- Solex will tell you when the whole process is complete.
- DO NOT REBOOT THE CONTROLLER YET! You must do the install for both the controller and the copter before rebooting anything. Once Solex tells you the install is complete, leave the controller and move on to the copter install.
I have no idea what to do now.
Please help.