More than three PWM outputs ? (mainboard schematics/PCB)

[VCD]

I would like one more PWM output than I already have.
For a given payload, I am using outputs for gimbal pitch & roll, one for trigging & camera on/off, then I would like one more for TRIG input.

Does anyone have the schematics/PCB of the mainboard ?

 

[Pedals2Paddles]

I have them home. I'll post later. I warn you, it will require EXTREMELY fine tip, precision soldering, under a magnifying glass.

 

[VCD]

Thanks in advance, I will solder thin silver wires on the DF17 if needed, (microsoldering is not a problem)
I am still on vacation, and have not checked exactly which pins, just asked in advance in case there were a easier way So I look forward to whatever information you have

 

[SteveReno]

I'll being doing the same operation soon, For a set of retractable landing Skids.
Hope this helps..

 

[VCD]

@SteveReno , not really, those are the three Ive already got. - now looking for one more

 

[Pedals2Paddles]

I will solder thin silver wires on the DF17 if needed

That is exactly what you will need to do. I tried it once for this very task. And I quickly learned that I am neither skilled or equipped for that kind of soldering!

 

[RussGuss]

Ok.

Sent from my SM-N900V using 3DRPilots Drone Forum mobile app

 

[Pedals2Paddles]

I believe this is what you're looking for. Mainly page 9.