Modified Sony DSC-WX220 USB triggered for Solo

[admaltais]

Hi,

We have a DSC-WX220 that does not serve (was for eBee) and I would like to use it with the Solo, trigger by the USB wire instead of the intervalometer - there is already a usb cable that is used to connect it to the flight controller.
Do you have any idea how it would be possible to connect it to the Solo?

Cheers

 

[andrew.baker.142]

Might be a challenge but probably doable. The cable connection on Solo is an HDMI for live video, but with an expansion board you should have access to other data streams.

 

[admaltais]

Might be a challenge but probably doable. The cable connection on Solo is an HDMI for live video, but with an expansion board you should have access to other data streams.

Hi Andrew, thanks for your answer

Do you think that kind of board can be use to breakout the signal?

I actually use a seagull map for sony and the goal is to use the 3 pin connector to send command to the wx by usb. Not sure if the D- or D+ is the signal.

Cheers

 

[andrew.baker.142]

The easier solution might be to buy one of the Solo breakout boards for sale. Try searching in this forum.