Did I brick my solo? Failed GC install and issues with stock cube

Joined
Nov 8, 2018
Messages
1
Reaction score
0
Age
39
Hi all,

I'm hoping someone can help me out with my issue or at least get my stock cube back in working order. I tried to do a Green Cube install and after following the instructions and video provided, my solo was stuck showing 4 green led lights. After trying to get the green cube working by pressing the SSWT button and power cycling to reset parameters and pressing the pair button and power cycling to reset the solo. None of this worked.

I think I ran into an issue where when I replaced the stock cube, the solo reset itself and now the solo will not connect to the controller.

Here's the current status for the stock cube:
- Solo has white leds up front and red in the back
- A slow blinking orange light in the peep hole next to the pair button
- Controller says Waiting for solo
- Solex sees a default Solo_#######
- I can connect to the wifi but cannot connect to the solo from Solex

Here's the current status for the green cube:
- Solo has 4 green lights on
- A fast blinking ornage light in the peep hole next to the pair button
- Controller says Waiting for solo
- Solex sees a default Solo_######
- I can connect to the wifi but cannot connect to the solo from Solex
 
The sswt button doesn't reset parameters. I do not know who started that non-sense but it is incorrect. You'll need to be more specific about which video and instructions you followed.
 

Members online

No members online now.

Forum statistics

Threads
13,093
Messages
147,741
Members
16,048
Latest member
ihatethatihavetomakeanacc