BMS Tattu MAH reading

Joined
Nov 3, 2018
Messages
14
Reaction score
1
Age
31
Location
Australia
Hi folks, I'm having an issue with the DIY battery reading from the solo tool. I have successfully hooked up the BMS to a brand new tattu lipo, I have fully charged the battery connecting it to the BMS powered it on and while powered on I disconnected the balance lead and power cord from the BMS then re connected the cables while the BMS was powered on in order to reset the data on the chip. The issue I'm running into is its giving me a wrong capacity reading which is 4420 mAh which was from the old stock solo battery as that battery was toast, the cell count the solo tool is reporting is the right data though the maH full Cap is not displaying 5200 maH which it should on a brand new tattu pack. Anyone have any idea on how I would be able to reset the BMS to display 5200 maH?

ewrewrewr.png




Thank you.
 

New Threads

Members online

Forum statistics

Threads
12,053
Messages
140,858
Members
13,980
Latest member
Amsecure