Alarm on my solo don't stop until turn device off

[jkrushl]

Good Job!

 

[yanshof]

Guys,

I can't make the connection between the RC and the drone.
The RC does not 'see' the drone at all.
You can see on the movie what the RC show me on his panel.
So, i cant change the parameters - because the RC is 'stuck' on same 'pre flight update' screen.
The application that i run on my android does not fine the solo - so this is same situation that bring me to the same problem ... the new solo that never ever fly before does not work and does not functioning.

 

[Dmitry]

Guys,

I can't make the connection between the RC and the drone.
The RC does not 'see' the drone at all.
You can see on the movie what the RC show me on his panel.
So, i cant change the parameters - because the RC is 'stuck' on same 'pre flight update' screen.
The application that i run on my android does not fine the solo - so this is same situation that bring me to the same problem ... the new solo that never ever fly before does not work and does not functioning.

Android must download the update from the Internet, then connect to WiFi controller, the controller comes with the tablet update, and then requests that the solo for renovation......

 

[Dmitry]

or do a full solo and reset the controller, and then make a pair
on android and service program and reinstall

 

[yanshof]

ok, this already done
the reset on the controller done already.
reset to solo done already.
checked the gps as i said before.
Still nothing help.

 

[Dmitry]

The photo shows that the update needs to first tablet controller

 

[Dmitry]

controller pair and solo done?

 

[Dmitry]

you should click on the solo for 2 seconds the reset button, no more than 2 seconds, just after boot solo (about 30-40 seconds)

 

[Dmitry]

have skype on the phone with a camera, I would have quickly helped?

 

[yanshof]

i'm on the solo android application - connecting the wifi of the controller.
And nothing happened.

The Solo is off because its make the crazy sound -
And nothing happened .... the controller is on hold on the same screen for almost 15 minus.

 

[Dmitry]

and was connected to the solo TOWER APP, as I wrote above in posts?


)))))))) I knew it! I went through it!
The following instructions on how to fix it:

From Tower App
1.- Follow the steps shown.
2.- Open the menu and go to Parameters.
3.- Once you area at the parameters section search for the SYSID_SW_MREV parameter.
4.- When you find it please select the number written to the right of the parameter name, delete it and write a "0" (Without quotation marks).
5.- Once you have changed the parameter go to the upper-right part of the screen and select the three dot icon.
6.- On that drop down list please select Upload Parameters.
7.- Finally turn off your Solo and then turn it back on.
*Please make sure to do both level and compass calibrations after doing the rese

 

[yanshof]

can't connect thru the Tower App.
No parameters.

 

[Dmitry]

solo does not include

1. Turn on the Internet on your tablet
2. Open the program 3DR SOLO APP
3. Check program updates
4.on WiFI controller
5.set with the tablet and controller
6.updates controller

 

[yanshof]

done

nothing happen.
No update found.

 

[Dmitry]

3DR SOLO APP controller see?

 

[Dmitry]

green icon at the top of the program?

 

[yanshof]

yes, i on it - on the 3DR SOLO APP and i see the controller on it.
I make the connection - and the controller is still stuck

 

[Dmitry]

1.Turn solo
2.wait 30-40 seconds
3. Hit the reset button for 2 seconds, no more

 

[Dmitry]

the controller has to find solo

 

[Dmitry]

the sound does not pay attention