Great Video!
As an addition, for those of you that don't want to modify the existing cable you can also modify a regular DF13 cable pretty easy.
Parts to modify a DF13 cable to Molex CLIK-Mate on one end.
Code:
Digikey Item# Description Price Each Requirement
WM2271-ND PLUG HSG 6POS 1.25 WIRE-BRD $0.370 (Need 1 per end)
WM2272CT-ND PLUG TERM 1.25 26-28AWG TIN $0.046 (Need 4 per end)
As an alternative to the mounted-to-the-board Passive Patch antenna:
http://www.ebay.com/itm/221785117851?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
You can modify this module's power/signal cable and leave the stock as-is.
Just remove the pins from the cable for the compass and change the other end to a Molex CLIK-Mate
This module has a IPEX MHF1 port and an Active Patch Antenna with a short cable.
What's nice about having the IPEX port is you can switch to a Taoglas and relocate the antenna away from the battery release spring using a longer cable.
Edit:
Also, on cold starts in a new location, I was getting about the same results as
sixshooterstang mentioned above.
On warm starts, like a quick battery swap, it was Ready to Launch before she could finish saying "Searching for GPS" the first time...