Gimbal HDMI ribbon causing Rolling video?

[Nate]

I chatted (online) with a B&H drone customer service person. I told them that the feed was fine coming out of the drone, but not when it ran through the gimbal. Their assessment was the same as mine: bad connection/board in the Gimbal. Not the cable coming from the Solo. The new gimbal works great...same hdmi cable as before.

 

[John hill]

Yes well my original Gimbal had no Vision at all and there is a flat Ribbon cable that goes from the base of the plug on the Gimbal into the circuit board and that was faulty it's a flexible flat cable you can see it if you look hard, but that seems to be a lot of their problems I think.