SOLO gimbal disassembly help

[dougputt]

Hi
Anyone out there have any information on disassembling a solo gimbal? I have 2 Unserviceable units and want to try swapping the main board from one that had a bent arm to another good unit.
The problem I'm having is all axis are twitching to the limits unless I stabilize with my hand for a few seconds. It will remain stable until I induce a roll, pitch, or yaw at which point it starts going bezerk again.

I tried tweaking some of the PWM through MP but no change

Thank you

 

[RichWest]

There are several threads, here's one with some disassembly advice. There are links to other threads within that might be of help.

Gimbal - Exploded View

Again it seems many are trying to repair gimbals, I've posted several threads of my efforts to repair said gimbals. For the sake of sharing, here are exploded view of the break down along with a detailing shot of the ribbon connectors and tools I use to disassemble the gimbal. And again a...

3drpilots.com

In your example description...that's either the "drummer" or "head banger" described failure. Search either of those terms, but in reality there is no cure found...only dumb luck if repaired. I've got four needing a solution, please find a cure....

If you have further question after searching/reading, please post them...I'm sure there are others that can offer up some further advice.