- Joined
- Aug 31, 2017
- Messages
- 80
- Reaction score
- 11
- Age
- 58
Hi
Just trying QGC planning app and was running a short mission full autonomously and noticed a few things
Motor speed seems lower than normal, as well throttle when I try to manually overide it acts more like a collective pitch, or should I say throttle has too much low speed and it will drop like a rock. After manually landing it with throttle (not land button) it would not shut down.
But the big issue is the pause/brake button does not seem to be working. I'm flying it with just the uploaded mission from a PC to the bird and the controller on, not running solex. After it completed the mission it was descending quite rapidly so I pushed the pause/brake button and nothing happened. Pushed and held it and it said something about Channel 7/Hi switch activated, pushing it again it goes to low.
Is there a way to get this functioning again? The RC7_option value is set to '0'
Green cube, autopilot 3.7.0, contoller 3.0.0 controller f/w opensolo-4dev-33, vehicle 3.0.0
Best
Just trying QGC planning app and was running a short mission full autonomously and noticed a few things
Motor speed seems lower than normal, as well throttle when I try to manually overide it acts more like a collective pitch, or should I say throttle has too much low speed and it will drop like a rock. After manually landing it with throttle (not land button) it would not shut down.
But the big issue is the pause/brake button does not seem to be working. I'm flying it with just the uploaded mission from a PC to the bird and the controller on, not running solex. After it completed the mission it was descending quite rapidly so I pushed the pause/brake button and nothing happened. Pushed and held it and it said something about Channel 7/Hi switch activated, pushing it again it goes to low.
Is there a way to get this functioning again? The RC7_option value is set to '0'
Green cube, autopilot 3.7.0, contoller 3.0.0 controller f/w opensolo-4dev-33, vehicle 3.0.0
Best
