Open Solo 4.0

Joined
Sep 1, 2020
Messages
39
Reaction score
1
Age
50
Location
Dallas, TX
Im doing the Open Solo 4.0 firmware update and my SOLO is showing a Green and Red light in the front and two yellow light on the back.

All this is after installing the new firmware sucsessfully

I installed the Fresh and reset files on both the quad and controller as well

should I try a hard reset on the quad only?

HELP
 

Attachments

  • IMG_2889.JPG
    IMG_2889.JPG
    2.3 MB · Views: 25
I did the same, but when my controller restarts it synced up w the solo, but then wants a required controller update from Solo software? What the heck? Btw, what software did you use to install the 4.0?
 
What you do you pay 12.99 and download an app called SidePilot then you go there and download the new firmware for the controller and the copter.
Make sure you download the “fresh install” files
 
I used Side Pilot too, but cannot get the controller to stay synced w it after installing the firmware upgrades? Should I not install each and every upgrade starting at the bottom of the list?
 

Members online

No members online now.

Forum statistics

Threads
13,093
Messages
147,741
Members
16,048
Latest member
ihatethatihavetomakeanacc