Open Solo 4.0

Joined
Sep 1, 2020
Messages
10
Reaction score
0
Age
46
Location
Dallas, TX
Im doing the Open Solo 4.0 firmware update and my SOLO is showing a Green and Red light in the front and two yellow light on the back.

All this is after installing the new firmware sucsessfully

I installed the Fresh and reset files on both the quad and controller as well

should I try a hard reset on the quad only?

HELP
 

Attachments

Joined
Sep 9, 2020
Messages
3
Reaction score
0
Age
46
I did the same, but when my controller restarts it synced up w the solo, but then wants a required controller update from Solo software? What the heck? Btw, what software did you use to install the 4.0?
 
Joined
Sep 1, 2020
Messages
10
Reaction score
0
Age
46
Location
Dallas, TX
What you do you pay 12.99 and download an app called SidePilot then you go there and download the new firmware for the controller and the copter.
Make sure you download the “fresh install” files
 
Joined
Sep 9, 2020
Messages
3
Reaction score
0
Age
46
I used Side Pilot too, but cannot get the controller to stay synced w it after installing the firmware upgrades? Should I not install each and every upgrade starting at the bottom of the list?
 

New Threads

Members online

Forum statistics

Threads
12,620
Messages
145,011
Members
14,772
Latest member
TheGeoEngineer