- Joined
- Jul 23, 2015
- Messages
- 88
- Reaction score
- 14
I have just installed my new gimbal and when the drone is powered on, the gimbal sounds like a small computer running, is this normal, is anybody else's sounding like this?
I have a similar noise issue with the gimbal. It sounds like a hissing noise, only at certain angles. When the gimbal is at 90 deg, no noise. I hear the noise when the gimbal is between 60-30 deg, and when it is faces all the way down.
I contacted 3DR via email. First they suggested to do the stick calibration, they sent me the documents (PC and Mac), I followed the instructions and did that, still same issue. So I called, they asked me to checked the cable inside, making sure nothing is touching the motors. I did reinstalled the gimbal 3 times, it seems a bit better. But the noise is still there now.
Wondering what else I can do, or just have to live with it. Any tips/suggestions would be much appreciated.
Thank you,
Hi there, I actually sent my back for a new one...I called and spoke to a manager withat a very stern tone and they sent a new gimbal out right away.I have a similar noise issue with the gimbal. It sounds like a hissing noise, only at certain angles. When the gimbal is at 90 deg, no noise. I hear the noise when the gimbal is between 60-30 deg, and when it is faces all the way down.
I contacted 3DR via email. First they suggested to do the stick calibration, they sent me the documents (PC and Mac), I followed the instructions and did that, still same issue. So I called, they asked me to checked the cable inside, making sure nothing is touching the motors. I did reinstalled the gimbal 3 times, it seems a bit better. But the noise is still there now.
Wondering what else I can do, or just have to live with it. Any tips/suggestions would be much appreciated.
Thank you,
We use essential cookies to make this site work, and optional cookies to enhance your experience.