Hi all.
I'm new to this forum (and also novice in the set-up of a drone) and need some help please. I'm flying a fixed wing drone (<2 kg) to do mapping. The plane is fitted with a pixhawk and flight planning and control using MissionPlanner (v 1.3.68) / ArduPlane (v 3.9.11).
When I am doing my preflight tests, everything works except there is no response to the throttle (Pixhawk has GPS fix & plane arms). If I view the radio calibration page in MP, there is a response on the throttle bar when I move the throttle lever on the transmitter. Also, if I set the transmitter to Auto mode, the engine fires up (which says to me that it is all wired up correctly).
I had the plane flying fine last year but haven't used it for a while - I have been trying to set up for a new camera. I don't think I have changed any parameter settings apart from those for the camera trigger and feedback.
Any help would be appreciated, thanks
I'm new to this forum (and also novice in the set-up of a drone) and need some help please. I'm flying a fixed wing drone (<2 kg) to do mapping. The plane is fitted with a pixhawk and flight planning and control using MissionPlanner (v 1.3.68) / ArduPlane (v 3.9.11).
When I am doing my preflight tests, everything works except there is no response to the throttle (Pixhawk has GPS fix & plane arms). If I view the radio calibration page in MP, there is a response on the throttle bar when I move the throttle lever on the transmitter. Also, if I set the transmitter to Auto mode, the engine fires up (which says to me that it is all wired up correctly).
I had the plane flying fine last year but haven't used it for a while - I have been trying to set up for a new camera. I don't think I have changed any parameter settings apart from those for the camera trigger and feedback.
Any help would be appreciated, thanks
