Welcome to 3DRPilots.com

Sign up and join the largest 3D Robotics drone community!

Gimbal problem. No live video feed, no gimbal control

Discussion in 'GoPro/GoPro Gimbal' started by Wyosf1, Jan 12, 2018.

  1. Wyosf1

    Joined:
    Jul 24, 2017
    Messages:
    2
    Likes Received:
    0
    I recently crashed my solo from a pretty high altitude. I ordered a best buy returned solo from ebay and was able to get it running by simply taking the pxhawk off my crashed solo and putting it on the best buy solo. Everything appears to be working except the gimbal. I have tested the go pro and the hdmi output is working. I have no live video feed from the gopro and I have no control over my gimbal. The light on the back of the gimbal is a slow flashing green indicating the gimbal is working. I can start and stop the gopro recoding from my app, but I just cant see video or control the gimbal. I have checked the hdmi cable as well as the gimbal connector. They appear to be fine. I have also noticed the gimbal twitches from left to right with sitting on a table. Has anyone encountered these problems? If so, what is the fix ( recently installed the open solo firmware on the solo and the controller)