bdrone

[Brian Diaz]

I have 2 green and two gold leds and my controller can not find the drone
MyWin32disk imager is spouting ERROR CODE 5 My controller is updated to open solo 4. I would like to get it up and running for my Uncle who is 76 years old. what do I do with the Cube Solo4.0.1 apj Do I micro sd type B the PixHawk or do I mini HDMI THE drone by using the slot for the Gimble Cable or do I flash the microSD and now Ive got 2 greens& 2 light blue and the binding button is not responding to make the inner orange blink

 

[jonbrotherton]

I have 2 green and two gold leds and my controller can not find the drone
MyWin32disk imager is spouting ERROR CODE 5 My controller is updated to open solo 4. I would like to get it up and running for my Uncle who is 76 years old. what do I do with the Cube Solo4.0.1 apj Do I micro sd type B the PixHawk or do I mini HDMI THE drone by using the slot for the Gimble Cable or do I flash the microSD and now Ive got 2 greens& 2 light blue and the binding button is not responding to make the inner orange blink

Try Pairing the drone to the Controller. With both powered up hold the Pair button on the bottom of the Solo for 5 seconds. If it won’t Pair you may need to flash the firmware manually.

The current files and instructions for installing them manually are here. https://www.patreon.com/posts/open-solo-4-96976821

Also download the Owners Manual and read it. It has a lot you need to know.