- Joined
- Jan 22, 2017
- Messages
- 309
- Reaction score
- 182
- Location
- Australia
- Website
- www.robertpower.com.au
I have successfully installed (I think) Arducopter 3.7 dev onto one of my open solo 3.0.0 birds with a black cube using Solex app. Aslo installed the 3.7 firmware update on the controller.
Everything as per Matt's ( @Pedals2Paddles ) instructions were fine and no problems....I think. I was able to do a compass and IMU cal and I am able to arm the bird to fly and start motors (without props at this stage).
My question is I note the change in LED lights (green and red on front and flashing blue on back) and found reference to them on the Net. If the bird sits for a period it makes a chirp, not sure if this is a reminder to hurry up and start flying or an error. I also not a different sound when booting up the solo.
Just want to make sure the above is normal before I put props on and fly.
Everything as per Matt's ( @Pedals2Paddles ) instructions were fine and no problems....I think. I was able to do a compass and IMU cal and I am able to arm the bird to fly and start motors (without props at this stage).
My question is I note the change in LED lights (green and red on front and flashing blue on back) and found reference to them on the Net. If the bird sits for a period it makes a chirp, not sure if this is a reminder to hurry up and start flying or an error. I also not a different sound when booting up the solo.
Just want to make sure the above is normal before I put props on and fly.