3D Robotics Drone Forum

XevetS
XevetS
What is the difference with the NT version?
XevetS
XevetS
does it use encoders?
C
Crewdawg56
the CAM IMU is not the I2C IMU that we had or have. supposed to be better and error free. not getting the issue i was having before. however the board itself is much different and it does not have that 222 resistor that we usually have to jumper to get the motors to come alive
C
Crewdawg56
problem is that my motors for most part are not coming alive
XevetS
XevetS
The resistor mod is for the Mavlink not for the Motors what is the status of led's and what does the GUI app tell you as far as errors?
XevetS
XevetS
as the storm boots up you will see the processes one by one it should tell you what the issue is
XevetS
XevetS
also just hook up the power wire nothing else besides the usb to the PC for the GUI..
C
Crewdawg56
the nt module its supposed to be error free. the lights on both the nt mod and the controller blinks green red on start up
XevetS
XevetS
So if you hook up power only does the gimbal initialize and balance itself with a camera installed?