Recent content by knyghtryda

What are your settings? Dusk/evening with point light sources is gonna difficult for anything smaller than a mirrorless/m43 camera. Push your shutter speed as long as you can hold stable. Handheld, thats probably around 1/15 sec. On a stabilized drone or a handheld stabilizer... who knows...

Thank you! That answers everything! Hope my questions help some others here.

Also, and this is more off-topic, can you power on and test the firmware on the cube if its not plugged into the carrier but just plugged in by its own micro USB?

So if I'm reading correctly from both P2P's method and the Solo Dev page, the manual procedure would be to SCP into Solo, copy over firmware, reboot. Repeat for controller. Load parameters through GC. Calibrate. Am I missing anything important?

That's a start. Thanks for the info! How did you get open solo installed on your setup? Solex?

I see. The fact that Solex can do it over wifi means it should be able to be done "manually" over wifi. Hopefully someone besides the developer of Solex knows what that method is.

I've read through those docs multiple times and they don't clarify any of my 3 questions, which is why I'm here.

Looking for some clarification on the current status of OpenSolo. It looks like there's two different branches at this point, one for the stock cube, one for the green cube. My questions are: 1) This means a stock cube (with its slewrate limiting) can use this build as is right? 2) can a...