Hello All.
I have come by a used Solo that never acquires any Satellites, app always shows 0 in red for Satellites and the Solo gives a continuous alert tone maybe 20 secs after boot. Same tone as in this video Solo and Controller are running Opensolo 3.0.0, I have reinstalled OpenSolo on both the Solo and Controller and reset parameters, Solex connects to the Controller and controller connects to the Solo ok, have tried a known good GPS (with cardboard Mod) and known good associated cable with no change, performed IMU and compass calibrations and currently have the Solo torn down so i can check solder joints etc
Anyone got an idea on where I should focus my attention beyond the GPS connector on the main board ? Is the cube itself likely to be where the issue may lie or maybe the motherboard ?
Many Thanks for any suggestions. Cheers John
I have come by a used Solo that never acquires any Satellites, app always shows 0 in red for Satellites and the Solo gives a continuous alert tone maybe 20 secs after boot. Same tone as in this video Solo and Controller are running Opensolo 3.0.0, I have reinstalled OpenSolo on both the Solo and Controller and reset parameters, Solex connects to the Controller and controller connects to the Solo ok, have tried a known good GPS (with cardboard Mod) and known good associated cable with no change, performed IMU and compass calibrations and currently have the Solo torn down so i can check solder joints etc
Anyone got an idea on where I should focus my attention beyond the GPS connector on the main board ? Is the cube itself likely to be where the issue may lie or maybe the motherboard ?
Many Thanks for any suggestions. Cheers John