G'day, I'm not receiving video to display (ipad4). Where have I gone wrong? Gimble is rockin' full motion. No issues there.
Just unboxed!
- Thread starter Lyrebird
- Start date
- Joined
- Jul 1, 2015
- Messages
- 654
- Reaction score
- 163
- Age
- 48
Thanks have just gone over all connectors to find hdmi loose. Appreciate your input
- Joined
- Jun 14, 2015
- Messages
- 1,553
- Reaction score
- 837
- Age
- 124
In addition to making sure the HDMI is plugged in snug, I always tell people to make sure the GoPro is firmly seated into the gimbal. It needs that back connector pushed all the way in firmly.
So with all those connections double checked, then try these fixes:
1. Power cycle.
Shut everything off (Solo, controller, even your tablet). Pull the GoPro battery out, reinsert and then power everything back on.
2. Switch camera type.
In the Solo app, go into camera settings and change the camera type from whatever GoPro you have, to any other model listed. Close settings. Then immediately reopen settings and switch back to the correct GoPro model.
If neither of those work, post back here and we can try some other stuff.
So with all those connections double checked, then try these fixes:
1. Power cycle.
Shut everything off (Solo, controller, even your tablet). Pull the GoPro battery out, reinsert and then power everything back on.
2. Switch camera type.
In the Solo app, go into camera settings and change the camera type from whatever GoPro you have, to any other model listed. Close settings. Then immediately reopen settings and switch back to the correct GoPro model.
If neither of those work, post back here and we can try some other stuff.
