I have been running Solex on my Android devices (Samsung Tab S3 and Note 9).
I like using my Note as the S3 is a 10-inch tablet and takes an aftermarket holder to mount to my controller.
I am using Solex App rev 1.9.0 on my devices and Open Solo 3.0 on my Solo and controller.
Solex worked great on both Android devices for months.
I recently updated to Solex 1.9.0.
I went fly my Solo last night and had some issues with the FPV video stream from my GoPro showing up inside the Solex app.
I get good FPV video on the S3.
I switched to my Note 9 Phone and I get a "video not supported" error on my Note 9 phone.
I tried the following troubleshooting steps:
1.Factory reset Solo
2. Factory reset Controller
3. Repaired Solo & Controller
Same issue.
Here is where I noted a difference between the two devices.
On my Note 9 when I open Solex the Note 9 shows the following:
1. "Unknown SSID" when the Phone Wifi is actually connected to the Solo WiFi broadcast
2. With Solex set to Solo as default it changes from Type Solo to Copter after reading the Solo parameters
3. When I push the fly button I get the "video not supported" when changes to the Fly screen
On my Note 9 did the following multiple times:
1. Removed Solex app
2. Deleted Solex folders
3. Reinstalled Solex
4. Told Note 9 to forget the Solo WiFi connection and went through the process of reconnecting and reentering the password.
Same problem. "video not supported" error.
It appears to me the Solex logic for parsing the telemetry stream on my Note 9 is not correctly identifying my bird as a Solo and resulting in the "video not supported" error.
Could be because the Solex app is not correctly identify the WiFI SSID correctly?
Is there another folder or file somewhere on my Note 9 I need to delete to complete remove Solex then reinstall it?
I would appreciate any thoughts or suggestions on this.
- Mike
I like using my Note as the S3 is a 10-inch tablet and takes an aftermarket holder to mount to my controller.
I am using Solex App rev 1.9.0 on my devices and Open Solo 3.0 on my Solo and controller.
Solex worked great on both Android devices for months.
I recently updated to Solex 1.9.0.
I went fly my Solo last night and had some issues with the FPV video stream from my GoPro showing up inside the Solex app.
I get good FPV video on the S3.
I switched to my Note 9 Phone and I get a "video not supported" error on my Note 9 phone.
I tried the following troubleshooting steps:
1.Factory reset Solo
2. Factory reset Controller
3. Repaired Solo & Controller
Same issue.
Here is where I noted a difference between the two devices.
On my Note 9 when I open Solex the Note 9 shows the following:
1. "Unknown SSID" when the Phone Wifi is actually connected to the Solo WiFi broadcast
2. With Solex set to Solo as default it changes from Type Solo to Copter after reading the Solo parameters
3. When I push the fly button I get the "video not supported" when changes to the Fly screen
On my Note 9 did the following multiple times:
1. Removed Solex app
2. Deleted Solex folders
3. Reinstalled Solex
4. Told Note 9 to forget the Solo WiFi connection and went through the process of reconnecting and reentering the password.
Same problem. "video not supported" error.
It appears to me the Solex logic for parsing the telemetry stream on my Note 9 is not correctly identifying my bird as a Solo and resulting in the "video not supported" error.
Could be because the Solex app is not correctly identify the WiFI SSID correctly?
Is there another folder or file somewhere on my Note 9 I need to delete to complete remove Solex then reinstall it?
I would appreciate any thoughts or suggestions on this.
- Mike