After the last update of the application has been a disaster gives me magnetic interference error without being near some metal and also calibration error does not allow me to fly I try to calibrate it in a flat place and tell me try again and try again i need a solution please!!!!!!!
calibration
- Thread starter cnouel
- Start date
Some people don't know what you're talking about. Maybe you could tell them how?
(I know you have nothing else to do).My favorite method of accomplishing a parameter reset is the SYSID_SW_MREV method.
1.Start the controller and SOLO. Make sure they connect to each other.
2. Start Tower on your Android device.
3. Connect via UDP .
4. Search for SYSID_SW_MREV in the Parameters screen
5. Set the value to 0.
6. Press the "Write" button in the Parameters screen.
7. Turn SOLO off, turn controller off, then both back on.
1.Start the controller and SOLO. Make sure they connect to each other.
2. Start Tower on your Android device.
3. Connect via UDP .
4. Search for SYSID_SW_MREV in the Parameters screen
5. Set the value to 0.
6. Press the "Write" button in the Parameters screen.
7. Turn SOLO off, turn controller off, then both back on.
Similar threads
New Posts
-
-
-
-
Free Music / SFX Resource for Your Videos - Over 2000 Tracks- Latest: Eric Matyas
-
Members online
No members online now.